How to Use Digiair Signal Strength Meter
Although cable and satellite television are found in a majority of homes in the United States, there is still a significant portion of the population that receives over-the-air television broadcasts. This method of receiving television signals requires an antenna, which is generally located on the roof of a home. Digiair signal strength meters are used to help homeowners adjust the antenna for the best television reception.
Other People Are Reading
Instructions
-
-
1
Connect the antenna coaxial cable to the antenna jack on the Digiair.
-
2
Press and hold the red "On/Menu" button on the Digiair to power on the device. The device will start in "Single Channel Mode."
-
-
3
Open the menu by pressing the red "On/Menu" button. A list of options will appear on the LCD screen.
-
4
Use the yellow "Up" and "Off/Down" buttons to highlight the mode you want to use. You can choose "Single Channel Mode," which shows the signal strength of one channel at a time, "Selected Ch's Mode," which shows the signal strength of up to six channels at once, or "Spectrum Mode," which shows a graph of all of the channels.
-
5
Turn the antenna while viewing the Digiair display. The higher the value displayed on the screen, the stronger the channel signal.
-
6
Turn off the Digiair by pressing and holding the yellow "Off/Down" button until the LCD screen shuts off.
-
1
Tips & Warnings
Switch between channels in "Single Channel Mode" with the "Up" and "Off/Down" buttons.
Set the channels for the "Selected Ch's Mode" by pressing the "On/Menu" button and selecting "Select Channels."
Use the "Up" and "Off/Down" buttons to choose the position of the channel and press the "On/Menu" button to begin channel selection.
Press the yellow buttons to find the channel and press the "On/Menu" button to store the channel.
