How to Change an HID Light Bulb

Save

Changing an HID light bulb is not the same as changing a conventional light bulb. HID -- high-intensity discharge -- bulbs produce more lumens per watt than ordinary light bulbs. These lights are usually found in industrial, commercial and transportation settings, but they are also used for flood lighting and other residential lighting tasks. HID lights use metallic salts that are vaporized within the bulb. Because of the bulb's intensity it burns extremely hot, thus one must take more care when changing an HID light bulb.

Things You'll Need

  • New HID bulb
  • Towel or cotton glove
  • Leave the light fixture off for at least 30 minutes before touching the HID bulb. These bulbs take much longer to cool than traditional bulbs, so let the bulb cool completely to avoid injury.

  • Remove the tempered glass covering, if applicable. Not all fixtures will have this component, but if yours does, remove the screws or clasps that hold the cover in place and remove it from the fixture.

  • Unscrew the HID bulb in a counterclockwise motion using a towel or cloth glove to remove it. Never handle these bulbs without a hand-covering as oils can damage the overall light fixture.

  • Screw the new bulb into your fixture with a clockwise motion, again using a towel or glove. HID bulbs are fragile so be careful not to over-twist when inserting.

  • Reattach any glass covering and turn on light to test. Leave the light on for at least 30 minutes the first time. HID bulbs must reach full temperature the first time they are turned on.

Tips & Warnings

  • Many municipalities won't allow burnt-out HID lights to be put out for trash collection, so it's wise to check with the local sanitation authority. Some communities have recycling programs for HID bulbs. Check local regulations for details and dispose of the old light in an approved fashion.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Change Xenon Lights

    Also known as a "high intensity discharge" bulb, xenon lights employ xenon gas and high voltage (15,000 volts) to initially create an...

  • How to Convert HID Xenon Headlights

    If your dissatisfied with the brightness of the factory-installed halogen headlights on your vehicle, you may want to convert your headlight assemblies...

  • How to Replace a HID Headlight

    HID headlight bulbs are generally no more difficult to replace than any other auto light bulb. They are more expensive than older...

  • How to Replace Xenon Headlamps

    High-intensity discharge, or HID, xenon headlamps use a higher voltage than ordinary halogen lights. When replacing them, the entire bulb assembly needs...

  • How to Replace HID Lights

    A high-intensity discharge, or HID, headlight provides a stronger beam of light than a conventional headlight but can burn out just like...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!