Hanging wall crosses can add decor to most any dwelling. Most wall crosses already come with preinstalled wall hangers. If your cross or crosses do not have wall hangers already preinstalled, purchase adhesive wall hangers from your local hardware store and attach them to the crosses before hanging them. If you are hanging more than one cross, decide where on the wall and in what design you want to hang them before you start.
Things You'll Need
- Adhesive wall hangers, one for each cross (optional)
- Stud finder (optional)
- 2-inch finishing nails, one for each cross
Rub the stud finder across the section of wall where you want to place the crosses. The indicator in the middle of the stud finder will stand straight up when it rubs up against the wood support behind the wall. Pounding a nail into a wall stud will reduce any potential damage to the drywall and add support to the weight of the crosses. You don't need to use a stud finder if you want to hang the cross directly into drywall.
Hold a pencil in one hand and place one of the crosses where you want it to hang. Position the cross so that it's straight. Place a finger from your other hand as close to the center of the cross as possible. Remove the cross and mark the center of the cross on the wall with the pencil. A small dot or "x" will do.
Hammer a nail into the spot you marked. For more support, angle the nail slightly downward. Leave about 1/4 of an inch sticking out from the wall. Do this for each position you've marked for your crosses.
Hang the crosses on the nails by placing the wall hanger over the nails. Adjust the crosses if necessary to center or straighten them. If the crosses do not hang out from the wall evenly, remove the crosses and hammer the nails that stick out the furthest just slightly to make up for the difference. Repeat the process until they hang evenly and straight.
Tips & Warnings
- Be open to changing the location of your wall crosses if you decided ahead of time that you only want to hang the crosses where the wall studs are located. You may discover in the process of locating the studs that they are not where you thought they were, and will need to adjust your design schematics. This could mean just moving the crosses slightly to the left or right or it could mean shifting walls, depending on preexisting furniture arrangements or wall fixtures.
- Hanging large or heavy crosses without the support of the wood wall stud behind the drywall can increase the chances of the crosses falling off and causing damage to the drywall. The longer and larger the size of the nail, the greater the potential is for the wall to crack. Choose the smallest nail you need to support the weight of your crosses.
How to Hang a Heavy Picture
If you have a picture that weighs less than 10 pounds, you can hang it from virtually any picture hanger. But that's...
How to Hang a Drop Ceiling
A drop ceiling is good way to cover up an unsightly and damaged ceiling, and it requires very little alteration of your...
How to Hang Skis or Snowshoes
After investing in ski gear and modern snowshoes, it pays to keep them well maintained and properly stored. Knowing where to hang...
How to Hang a Rug on the Wall
Hanging a rug on the wall can add elegance to your home or office. There are a number of ways to hang...
How to Decorate a Living Room Wall With Crosses
Crosses Hardware and tools for hanging Paper
How to Decorate With Wall Crosses
Religious crosses are great decorating elements that bring a realm of spirituality to any room. Even if you are not particularly religious,...
How to Hang Family Photos on the Wall to Display Them
With creative family photo displays, guests in your home will be drawn to gallery walls that chronicle your family and lifestyle. Modern...
- Handmade Wall Crosses