Diamond Club

Click to play our newest game, solitaire!

Spade Heart

How to Setup a Monitor Mixer

Monitor mixing board
sound mixer image by Miroslava Holasová from <a href='http://www.fotolia.com'>Fotolia.com</a>

Stage monitors allow a performer to hear his own performance, separate from what the audience hears. When sound delay, audience noise, or other sounds interfere with music emanating from the main speaker banks, a performer relies on stage monitors to hear his own performance, as well as the performance of other artists on the stage. Monitor mixers control stage monitors and allow the performer to customize the combination or volume of music coming out of them. Setting up a monitor mixer can be a challenging task, depending on the circumstances or environment.

Monitor mixing board
sound mixer image by Miroslava Holasová from <a href='http://www.fotolia.com'>Fotolia.com</a>

Things You'll Need:

  • Monitor Mixer
  • Stage Monitors

Choose an appropriate location for the monitor mixer. Typically, this is on or to one side of the stage area, behind the main speaker banks.

Connect the stage monitor speakers to the appropriate outputs on the monitor mixer. Depending on the situation, the number of stage monitor speakers could range from a single speaker to a dozen, or more.

Stage microphone
Microphone image by Towards Ithaca from <a href='http://www.fotolia.com'>Fotolia.com</a>

Connect the instrument and microphone feeds to the appropriate inputs on the monitor mixer. These may come directly from the stage or as a output from the main or front-of-house mixing board.

Set the monitor mixer to default settings, also know as "zeroing out the board". This is accomplished by reducing all volume and effect level controllers to zero or off, and setting all equalizer controllers to neutral or a "flat" setting. This ensures that the only changes to the mixer settings are the ones you initiate.

Performer with an electric guitar
guitarist image by david hughes from <a href='http://www.fotolia.com'>Fotolia.com</a>

Adjust the mix of instruments and volume level of each to suit the performance, using each monitor. As opposed to the music heard by the audience, each performer may only want to hear his or her own performance mixed with a limited number of other performers. For example, a bass guitar player may only want to hear his guitar, the snare drum, and the lead singer in his monitor mix. A drummer may want to hear the guitarist, bassist, and lead singer in his monitor mix. This is the part that gets tricky and may require some extensive adjustments before the desired levels are achieved. Work with each performer to make sure they are happy with their monitor mix.

Tip

Set up "groups" or "sub-mixes" to allow you to control a number of inputs with one control. The most common example of this is the drums, where there may be several microphones involved. Label each input and channel on the monitor mixer to eliminate confusion during the performance. Test the monitor mix with each performer, as well as with the entire band to ensure that everyone is happy.

Warnings:

  • Never plug in inputs or monitor speakers with the monitor mixer turned on, as this can cause damage.
Our Passtimes