How to Secure Memorabilia in a Shadow Box
Securing memorabilia in a shadow box may be completed using several methods. The heaviness of the objects will determine what method is used. Glue, double sided tape and wire are the three most common ways of securing memorabilia.
Things You'll Need
- Shadow box
- Sturdy backing
- Backing cover
- Double-sided tape
- Hot glue gun
- Hot glue sticks
- Hole punch
- Crafter's wire
- Needle-nose pliers
Instructions
-
-
1
Cut a backing for the shadow box out of heavy cardboard such as mat board. Cover the backing with desired paper.
-
2
Place the memorabilia on the backing to decide where each item will be placed. Remember the pattern and remove all items from the backing.
-
-
3
Begin with the items that will be to the back of the shadow box. Attach photographs or any paper items with double-sided tape.
-
4
Medium weight items should be attached with hot glue.
-
5
Heavy weight items need to be attached with wire. Poke two to four holes through the shadow box backing. Insert crafter's wire through one or two of the holes. Wrap the wire around the heavy object and thread the end of the wire or wires through the open holes. Use needle-nose pliers to twist the wire on the back of the backing sheet.
-
6
Place the memorabilia on the backing into the shadow box and secure.
-
1
Tips & Warnings
Use an "X" for placement of wire when using four holes to attach a heavy object. The "X" on the front of the object will increase stability.
Keep your fingers out of the way when punching the holes through the backing.
