How to Remove a Rear Wiper Blade on a Caravan
Removing the rear wiper blade on a Dodge Caravan employs the same technique as removing the front wiper blades. Since the vehicle was introduced in 1984, there have been a couple of designs on the blades, affecting the removal procedure. In addition, if aftermarket blades have been installed, there may be yet another procedure required.
Other People Are Reading
Instructions
-
J-hook
-
1
Lift the rear wiper arm that integrates a J-hook style wiper arm.
-
2
Squeeze the two metal clips under the J-hook together, and then slide the wiper blade down away from the hook. Use a screwdriver to pry the blade away from the arm if necessary.
-
-
3
Separate the blade from the wiper arm and be careful not to let the wiper arm J-hook strike the rear windshield.
J-hook Quick Connect
-
4
Lift the rear wiper arm away from the rear windshield.
-
5
Lift up the release tab beneath the J-hook while pulling away from the hook with the blade. Use a screwdriver if necessary to help pry the blade away from the wiper arm.
-
6
Separate the blade from the wiper arm.
Bayonet
-
7
Use a slotted screwdriver to lift the retaining tab of the wiper blade from the wiper arm on the bayonet-style wiper arm.
-
8
Pull the wiper blade up and away from the wiper arm.
-
9
Separate the wiper blade from the wiper arm and be careful not to allow the wiper arm to strike the rear windshield.
-
1
Tips & Warnings
Most aftermarket wiper blades come with adapters to fit your Caravan. Be sure to purchase the correct size if replacing the wiper blades. The rear wiper blade on most Caravans is either 16 inches or 18 inches long.
