How to Install a Wardrobe Door Track Over a Laminate Floor

Sliding doors can make the most of a tight fitting area. In a smaller-size bedroom, for example, a set of mirrored wardrobe doors can not only maximize space, but also make the room seem larger. Installing a wardrobe door track over a laminate floor doesn't require any more work than installing one over another type of flooring, like carpet. The main thing: Make sure that you have the right kind of drill bit to ensure you get the anchor holes deep enough.

Things You'll Need

• Wardrobe door track
• Saw
• Sandpaper or file
• Pencil
• Power drill
• New drill bit
• Anchors
• Screws
• Screwdriver

Instructions

1. Measure the opening of the wardrobe.

2. Take the wardrobe track and cut the end to the measurements of the wardrobe door opening. File or sand down the edges. Take caution, as these will be sharp.

3. Lay the wardrobe track on the floor in the opening. Use the pencil to mark the spots for the screws.

4. Take your drill and drill holes where you marked. Which drill bit you use depends on the type of subfloor you have. For wood, you can use an ordinary drill bit. On concrete, you will have to use a special concrete bit in order to be able to cut into the harder material. Use a vacuum to clear away the debris.

5. Insert anchors into the drilled holes.

6. Lay the wardrobe door track in the wardrobe opening, ensuring that it lines up with the anchor holes.

7. Secure the wardrobe door track by inserting screws through the track and into the anchors. Tighten with a screwdriver.

Tips & Warnings

• Always use a new, sharp drill bit when drilling in laminate, otherwise you may crack the plank.

• Always use caution and wear the proper safety equipment when using power tools.

References

• Lowe's - Installing Sliding Doors

Resources

• Installing Closets