Plan the perfect garden with our interactive tool →

How to Deal With a Flooded Yard With Only a Garden Hose

Man and woman with umbrellas playing in the rain.
Ryan McVay/Lifesize/Getty Images

Many homeowners fear flooding. It can ruin yards and gardens and cause countless problems with staining and mold inside the home. Even those who don’t live in flood zones can have flooding problems during very heavy rains or when snow melts in the spring. A great thing to have is a sump pump in your basement, which will keep your house flood-free in all but the worst of conditions. However, you can’t install a sump pump in your backyard. It is also fairly difficult to bail out a yard. A siphon is the easiest, fastest way to drain your yard. You can purchase water pumps that have siphons specially designed for yards, but they’re not necessary. You can create a siphon using items in your home.

Connect two or three garden hoses together. If you have a small backyard, this should be enough. For very large yards, use four to six hoses, but connect them in sections of two or three so you can siphon water from either side of the yard to remove it faster. Make sure the connections are good and the hoses have no leaks.

Find a place to direct the water. It should be within reach of your hose and in a place where the excess water will harm no one else. A street drain, nearby creek or pond, or a kids pool will all do fine. Toss one end of the hose into the center of the flood and the other into the receptacle to make sure the hose is long enough. Add another hose if necessary.

Coil the hose loosely together and let one end drop into the flooded area. Lower the rest of the hose into the water and hold it under until bubbles stop forming on the water’s surface. This means the hose is full of water. Place your thumb or palm over the end of the hose closest to you. Make sure the seal is tight so no water escapes.

Drag the end of the hose to the receptacle and get it as close to the receptacle as you can. Direct the end of the hose downward and remove your hand. Water should pour from the end of the hose. This will continue until the flood end of the hose runs out of water.

Watch to make sure the water continues to flow. If it runs out, check on the flood. If there is still water in your yard, repeat Steps 3 and 4 until all of the water is gone.

Related Articles

How to Connect the Pool Vacuum Hose to the Pump
How to Connect the Pool Vacuum Hose to the Pump
How to Stop Theft from Outdoor Water Spigots
How to Stop Theft from Outdoor Water Spigots
How to Remove the Impeller on a Hayward Pool Pump
How to Remove the Impeller on a Hayward Pool Pump
How to Use a Pressure Washer With a Rain Barrel
How to Use a Pressure Washer With a Rain Barrel
How to Convert an Intex Pool to a Bigger Pump
How to Convert an Intex Pool to a Bigger Pump
Is It OK to Drain Pool Water Into a Yard?
Is It OK to Drain Pool Water Into a Yard?
How to Drain an Inground Pool Below the Skimmer
How to Drain an Inground Pool Below the Skimmer
How to Vacuum a Doughboy Pool
How to Vacuum a Doughboy Pool
How to Screen your Yard Drains
How to Screen your Yard Drains
How to Clean a Briggs Intek Carburetor
How to Clean a Briggs Intek Carburetor
Problems With Baracuda Pool Cleaners
Problems With Baracuda Pool Cleaners
How to Use Polaris Pool Cleaner
How to Use Polaris Pool Cleaner
Garden Guides
×