How to Change a Light Bulb in a Whirlpool Microwave
The light bulb in Whirlpool microwave ovens is activated when the microwave door is opened or when the microwave is operating. The light allows users to better see the food or drinks they are cooking or reheating in the oven, allowing them to cancel operation if any problems, such as spill over, occur. The light bulb has a finite life and needs replacement whenever it burns out. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Phillips screwdriver
- Replacement bulb part number 8204855, available from Whirlpool
Instructions
-
-
1
Unplug the microwave oven to prevent injuries.
-
2
Remove the grill mounting screws located on the upper part of both sides of the grille with the Phillips screwdriver.
-
-
3
Pull forward on the top of the grill and lift it off of the housing. Locate the bulb cover near the front of the unit, behind the grille.
-
4
Pull up on the bulb cover to expose the old light bulb.
-
5
Unscrew the old bulb and dispose of it in a waste receptacle.
-
6
Screw in the replacement bulb and press down on the bulb cover.
-
7
Put the bottom portion of the grille back on the housing, push up on the top of the grille to line it up and reinsert the mounting screws.
-
8
Plug the microwave oven into an electrical outlet and open the door to test the replacement bulb. It should come on when the door is opened. If it does not turn on, reinstall the bulb by following Steps 1-7. If it does not work a second time you may have a faulty bulb or the microwave needs service from a technician.
-
1
