How to Add Memory to a Sony VAIO Computer
If your Sony VAIO computer has been running slowly, chances are that adding more memory will help it to perform faster and be more reliable. Adding RAM to your computer will help it boot up faster, and once it has booted up, that additional memory will help your programs run more efficiently.
Other People Are Reading
Instructions
-
-
1
Turn off your laptop and disconnect the power supply. Also disconnect any network cables, USB cables, and peripherals.
-
2
Use a screwdriver to remove the screws on the bottom of the computer. Look at the screws to determine if you need a standard or Phillips head screwdriver.
-
-
3
Turn the computer over so that the keyboard is facing you, then carefully place your fingers behind the last row of keys on the keyboard.
-
4
Lift the keyboard gently out of the way and turn it upside down so that it rests on the touchpad. Be sure not to remove the keyboard cable.
-
5
Remove the existing RAM module by pulling gently on the tabs. The RAM module should slide out smoothly.
-
6
Remove the new RAM module from its packaging and slide it into the slot at a 45-degree angle. The tabs should click into place and hold the new RAM module securely.
-
7
Replace the screws on the panel at the bottom of the computer, then turn the laptop right-side up and put the keyboard back in place. Reconnect the power to the laptop, turn it on, and allow it to recognize the new RAM module.
-
1
