How to Remove Skid Mark Stains
When a moving car or truck hits the brakes and makes a sudden stop or a sharp turn, the consequences are what are referred to as "skid marks" in the asphalt. Skid marks are broken up into separate categories: acceleration marks, yaw marks and brake marks. Whatever the type, it is possible to remove these marks with the proper equipment. Does this Spark an idea?
Things You'll Need
- Jet pressure washer
- Wire brush
- Latex gloves
- Goggles
- Muriatic acid
- Face mask
Instructions
-
-
1
Put on all the protective equipment, such as gloves, goggles and facemask. It is extremely important that you do not skip this part, as you need these items to protect the most vulnerable parts of your body, such as your hands and eyes, from the abrasive chemical.
-
2
Activate the jet washer.
-
-
3
Clean off all debris and residue from the asphalt with the pressurized water.
-
4
Apply the muriatric acid directly onto the area with the skid marks. Do not oversaturate the area but apply liberal amount. Allow the acid several minutes to soak in.
-
5
Get down on your knees, on top of the skid mark area.
-
6
Scrub the area with the wire brush using an up-down or circular motion. When scrubbing, use pressure to ensure that all dirt and debris are removed and to scrub in the acid.
-
7
Rinse the entire area with the jet washer to ensure that all of the acid and debris are completely washed off.
-
8
Repeat the steps as often as necessary to remove the skid marks.
-
9
Take a shower and wash yourself thoroughly with disinfectant soap to ensure that no harmful chemicals are on your skin.
-
1
