How to Paint a Stucco Fireplace Mantel
A stucco fireplace mantel adds weight and texture to a fireplace, and can give a very Southwestern flair to a room. Stucco is often self-colored and doesn't need painting, but it can become discolored over time. It is fairly easy (if a little messy) to paint a stucco mantel. Choose a color that matches the rest of the room, and looks natural on stucco--earth tones are a good choice. Stucco can be hard to clean, so choose a washable paint with a little bit of a gloss, such as an eggshell or satin finish. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Detergent
- Drop cloths
- Blue painter's tape
- Caulking
- Masonry patch
- Brush
- Roller
- Roller pan
- Lambswool roller
Instructions
-
-
1
Choose a color that isn't so light that it will show dust or smoke, and complements your fireplace and room decor.
-
2
Clear everything from the mantel, and move furniture away from the area to give yourself plenty of space to work without spattering paint.
-
-
3
Clean the stucco to remove as much dust and grime as possible.
-
4
Repair hairline cracks with paintable silicone caulking. While the caulk is fresh, wipe it with a damp rag so it blends with the surrounding texture. Use stucco or masonry patch for larger cracks or chips. It's available in both pre-mixed and powdered form. Tile grout patch works well too. Follow the directions for drying times.
-
5
Protect the floor and adjacent surfaces. Use blue painter's tape to seal edges around the mantel. Tape some plastic, newspaper or masking paper to the surrounding wall for extra protection; you're more likely to spatter when rolling and brushing paint onto a rough surface like stucco. Use drop cloths on the floor.
-
6
Paint the edges and corners with a brush first, then roll the larger areas. Use a 1-inch nap lambswool roller cover if the stucco has a heavy texture. This will allow you to get into all the nooks and crannies effectively.
-
7
Apply at least two coats of paint. When the paint is dry, pull away the masking tape. Allow several days for the mantel to dry before putting anything on top of it.
-
1
Tips & Warnings
Thin the first coat of paint with up to a pint of water per gallon so it soaks in and penetrates better. Apply subsequent coats without thinning.
If the mantel isn't very large, paint the whole thing with a 3-inch brush.
