Pecan trees are popular for their tasty nuts. The pecan tree is also valuable for its quality wood. Factories and furniture builders use pecan for its hardness, beauty and durability. Pecan wood is a light red-brown color that had some dark brown streaks throughout the grain. Furniture made from pecan wood is very valuable. Do not throw away pieces of pecan furniture that need a little work; instead, refinish these pieces to their original beauty and you will have a piece of furniture to last the rest of your lifetime.
Things You'll Need
- Plastic zipper bag
- Stain with polyurethane included
Remove any hardware that is on the piece of furniture. Place these in a plastic zipper bag to reattach later.
Work outside in a well-ventilated area. Work in a covered area if possible to keep debris from falling into your stain and ruining the project. Cover any work surface to protect it from the stripper or the stain.
Apply the stripper to the pecan wood using a natural bristle paintbrush. Allow the stripper to sit for as long as the manufacturer's directions suggest.
Scrape off the stripper and the old finish using a plastic scraper. Do not use a razor blade as this will scratch and gouge the wood.
Sand the entire surface of the pecan wood using 200-grit sandpaper. Wipe off all the dust and debris with a damp rag.
Feel the surface of the wood. Look for imperfections or spots that are not perfectly smooth. Re-work these areas if necessary.
Apply the stain using a clean rag. Wipe in one direction along the grain of the wood. Cover the pecan wood completely and evenly. Let the stain dry for twenty-four hours.
Check the surface of the pecan wood over to make sure the stain is even. Apply a second coat of stain if desired. Allow the stain to dry for 72 hours.
Reattach any hardware.
Tips & Warnings
- Using a stain that already includes the polyurethane saves you several steps. Use regular stain and a polyurethane finish if desired. Make sure to lightly sand the stain before applying the polyurethane and also sand between each coat of polyurethane for a smooth professional look.
- It is a good idea to allow your piece of furniture to cure for a week before placing any knickknacks on it. If the finish is not completely dry, these items can cause damage to the surface of your furniture and imperfections in your finish.
How to Refinish Wood Furniture
Refinishing basically involves three procedures: stripping the old finish, sanding and preparing the wood, and applying a new finish. Preparation greatly influences...
How to Lime Finish Wood
The technique of lime finishing wood has been around for centuries. Whether refinishing wood flooring or wanting a decorative touch for a...
How to Refinish a Wood Table
While you may want an antique dining room table for your home, you'll probably pay upward of $3,000 for the pleasure. However,...
How to Refinish Furniture With Blasting
Don't overlook a good-quality piece of wooden furniture just because it is covered with layer-upon-layer of old paint. You can make any...