How to Build a Nice Computer Desk
Can't find a computer desk to your liking? Building and customizing your own computer desk is probably the best route to go. It does take a little concentration, but you do not have to be a carpenter. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Wood (pine or chip board)
- Articulating kit for keyboard tray
- Screws (3/4")
- Screwdriver
- L brackets
- Measuring tape
- Pencil
- Saw of your choice (hack saw or circular saw)
- Sandpaper
- Wood stain (mahogany, cherry wood or other)
Instructions
-
-
1
Design first on paper how you want your desk to look. Decide on a size; do you need a small desk, a large one or corner one? After you have decided on a design, pencil in the cut marks on the wood for the table top and keyboard tray.
-
2
Using a circular saw or other wood cutting tool, carefully cut out the design of your desk table top and keyboard tray. Sandpaper any rough edges to prevent splinters and then set aside.
-
-
3
The legs can be made with 2" x 2" wood or thicker if your table top is heavier. You can cut them straight or give them a tapered look if that is what your design calls for. Cut the legs the same length to prevent an uneven desk. Sand any rough edges on your wooden legs to prevent splinters.
-
4
Once all your pieces are cut and sanded, assemble the desk. Piece the four legs to the bottom of the wooden top using L brackets or 1/4" screws. Attach the keyboard tray to the bottom of the wooden top using the articulating kit.
-
5
Stain the desk with your choice of stain. You may want to apply 2-3 coats to achieve a nice look. Dark mahogany or cherry wood is a fine choice for a nice desk!
-
1
Tips & Warnings
Make sure all pieces are sanded; this prevents splinters and makes it easier to stain.
Be sure all legs are cut the same length; otherwise, your desk will wobble.
When using stain, apply it outside or in a well ventilated area to prevent inhaling harmful fumes.
