How to Make Deer Blinds with Windows
Deer stands are an excellent way to put you in the woods for long periods of time, increasing your chances of a good hunt. However, many stands, regardless of design, can be less than comfortable. Worse than that, many stands frequently restrict the movement of the hunter, limiting shooting opportunities. To overcome this, you can actually build windows into your stand, promoting greater field of vision while retaining insulation in extreme weather conditions. With a few common sense tips, you may be surprised just how little difference there is between the cabin and your deer hunting position.
Other People Are Reading
Instructions
-
-
1
Cut window holes in at least three sides of the ply board panels you intend to use when building the deer stand. It is much easier to measure and place these apertures before actually erecting the panels in the woods. They should be located to allow easy access from a sitting position once they are installed.
-
2
Install sealant between the frame and the raw wood in order to promote maximum protection from the weather. It may be necessary to use caulking to make the seal as tight as possible. This will ensure that wind and cold weather are kept at bay as much as possible.
-
-
3
Use windows that easily slide so that when a shooting opportunity presents itself you will not have to wrestle with a stubborn latch or crank. Ease of use is crucial because when the game presents itself, you will not have time to worry about the mechanics of your deer stand window.
-
4
Noise proof the window so that opening does not emit an alarming sound that might spook the game. WD-40 is an excellent lubricant for metal parts that might otherwise squeak or create unnatural jarring sounds.
-
5
Install sunshades in each of the windows that might be in direct sunlight so that you will not be faced with glare conditions that will make your deer stand stand out during early morning and late afternoon light conditions.
-
6
Use plastic rather than glass for the windows. Plastic is not only less prone to cracking, but it is also less susceptible to glare and will not be as loud if it is accidentally jarred, either by hand or a piece of loose equipment.
-
7
Protect your windows when the stand is not in use by covering them with loose ply board panels or awnings that will reduce the chance for wind damage. These precautions will ensure the life of the windows and the viability of the stand for years to come.
-
1
