×

How to Seal Self-Stick Vinyl Tiles

Gail Logan

Self-stick vinyl tiles are a popular choice among homeowners who want a new flooring look with a low investment of time and money. Because of vinyl's porous nature, dirt will become ground into the tiles over time, resulting in a dingy finish. In addition, vinyl tiles are prone to water damage.

Applying a sealant over self-stick tiles will form a hard barrier and help ensure the longevity of the tiles.

Tip

If the flooring begins to yellow after applying sealant, clean with a Magic Eraser, then apply a new coat of sealant.

Warning

Do not apply one thick layer of sealant in place of two thin coats. It will not harden properly.

  1. Sweep the floor, then mop to remove all traces of dirt and debris. Allow the floor to dry completely.

  2. Tape over the baseboards to protect them from the sealant.

  3. Pour the sealant into a bucket, and dip a mop with a sponge head into the bucket. Press out the sponge so it is not dripping.

  4. Apply a thin layer of sealant to the tiles, beginning along the wall and turning the mop at the edge of the walls to form a U-shape and travel in the opposite direction. This will prevent you from going over the same section twice.

  5. Allow the sealant to dry for four or five hours. The sealant will appear milky white when applied, but it will be clear when dry.

  6. Apply a second layer of sealant in the same manner, if desired. Allow to dry before allowing traffic across the floor.

The Drip Cap

  • Self-stick vinyl tiles are a popular choice among homeowners who want a new flooring look with a low investment of time and money.
  • In addition, vinyl tiles are prone to water damage.
  • Applying a sealant over self-stick tiles will form a hard barrier and help ensure the longevity of the tiles.
  • Tape over the baseboards to protect them from the sealant.