How to Build a Skateboard Grind Box
A grind box simulates a ledge you might find in the natural skating environment. This grind box will be 6 feet long, 14 inches tall, and 2 feet wide. You can adjust these plans to suit any size you want.
Other People Are Reading
Instructions
-
-
1
Cut the plywood into a 6-foot-by-2-foot rectangle and and a 6-foot-by-14-foot rectangle.
-
2
Using 2-by-4s, make two 6-foot-by-2-foot frames.
-
-
3
Add 2-by-4 support beams every 12 inches to 16 inches across one frame.
-
4
Cut 2-by-4s into six legs at the desired height--in this case 14 inches.
-
5
Attach the legs to the two frames at the four corners and in the middle on each side.
-
6
Attach plywood to top (with the support beams) and side.
-
7
Drill holes in the top and side of the angle iron.
-
8
Screw angle iron to the edge of the grind box where the two sheets of plywood meet.
-
1
Tips & Warnings
Countersink the screws in the angle iron to insure a smooth and safe grind.
Use caution and wear proper safety equipment when operating power tools.
