When liquid refrigerant is forced through a restricted opening, it changes from a liquid to a gas. This change of state causes the refrigerant to become cold, and as it passes through the system, it absorbs heat from the passenger compartment. The vehicle's air-conditioning relies on this change of state to operate, and the expansion valve provides the restriction used to control the volume and pressure flowing through the system. Diagnoses of expansion valve malfunctions are done with an A/C gauge set.
Things You'll Need
- A/C gauge set
Attach the gauges to the A/C system by locating the low-pressure and high-pressure service ports. The low-pressure port can be found on the low side line between the accumulator (sometimes on the accumulator) and the compressor. The accumulator is the cylindrical part attached to the system near the passenger side of the firewall.
The high-pressure port is located on the high side line between the condenser and evaporator. The condenser is the radiator-like part located in the front of the vehicle, and the evaporator is located under the dash.
Make sure the valves are closed on the gauge assembly, and attach the quick-disconnect hoses to the service ports.
Start the engine and set the A/C controls to max A/C, medium blower speed and recirculating air. Allow the system to run for five minutes for pressures to stabilize.
Normal gauge readings will be between 30 and 45 psi on the low side, and 200 to 350 psi on the high side. The expansion valve can fail in one of two ways. When stuck open, it allows two much refrigerant flow, and a drop in high side pressure. A gauge reading of less than 200 psi on the high side will be seen when this happens. When stuck closed, a higher than normal high side reading will be seen. Typically, this will be over 400 psi and climb until the high-pressure switch shuts down the system. Very low or very high readings on the high-side gauge indicate a faulty expansion valve.
Auto AC Repair Troubleshooting
Fixing an air conditioning problem with your car can be very expensive. When an A/C system needs repair or maintenance it can...
How to Test an AC Expansion Valve
Thermostatic expansion valves regulate the flow of refrigerant to an evaporator inside a cooling system. TEVs or TXVs, as they are often...
What is an Air Conditioning Expansion Valve?
Air conditioners have many parts that have high importance in their continuous function, from the compressor to the refrigerant coils. The expansion...
What Are the Functions of an Expansion Valve?
Most refrigerators and air conditioning systems are made up of condensers, compressors and expansion devices, as stated on the Encyclopedia Britannica website....
Expansion Valve Troubleshooting
Many refrigeration systems use the thermostatic expansion valve, a combination of valve and sensor. The TXV is designed to sense the pressure...
Honda Civic Air Conditioner Problems
Honda air conditioners are designed to efficiently cool or warm the air in the car. They use a refrigerant, typically Freon, to...