How to Hang Grommet Panel Curtains
Grommet panel curtains are easy to hang and will enhance any room. Grommet panel curtains are typically attached to the curtain rod with decorative S hooks in a finish that matches both the grommets and the curtain rod. If you want to be more creative, you can hang the curtains with decorative shower curtain rings instead of S hooks. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Remove the curtain rod from the bracket and slide on the amount of decorative S hooks you'll need for each grommet curtain panel. For example, if each curtain panel contains 20 grommets, you'll need 40 S hooks.
-
2
Place the curtain rod with S hooks back into the brackets--you might need a step stool or ladder for this.
-
-
3
Insert the bottom of each S hook into the corresponding grommet hole, working from one end to the other. Slide this grommet curtain panel to the far side of the curtain rod when finished and repeat for additional panels.
-
4
Adjust grommet curtain panels so they hang evenly, then tighten the small screw located on each curtain bracket to secure the rod.
-
5
For hanging grommet curtain panels with shower-curtain rings, attach the shower-curtain rings to the curtain panels first, leaving the rings open, and then attach and close the rings over the curtain rod.
-
1
Tips & Warnings
If the grommets are large, or for a more casual look, you can purchase a curtain rod that is slim enough to be slid directly through the grommets instead of using S hooks or shower rings.
References
- Photo Credit Hemera Technologies/Photos.com/Getty Images
