How to Remove Wood Decking

Save

Whether you are removing decking to make way for more lawn space or replacing damaged deck boards in your old deck, removing wood decking can be physically difficult. However, it does not have to be impossible. A few tools and a little know-how can help you remove old wood decking to make way for the new.

Things You'll Need

  • Crowbar and hammer or deck board removal tool
  • Screwdriver
  • Determine whether the boards are screwed in or nailed in. Boards that are screwed in will be easier to remove than nailed boards. If screwed in, closely examine the head of the screw. This will determine what kind of screwdriver bit to use.

  • Place the crowbar underneath the board and hit it with the hammer to pull up the board and nails. It is also possible to use a deck board removal tool, which will make the job easier. If the board is screwed down, unscrew with a screwdriver.

  • Remove the boards. As each board is unattached, place it aside, being careful to collect nails and screws. Nails and screws should be placed in a safe place where they will not become scattered or stepped on.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Remove Ice From a Wood Deck

    In northern climates where snow and ice are frequent visitors to our homes, one question that is asked frequently is, "How do...

  • How to Remove Grease From a Wood Deck

    Wood decks provide convenient spaces for entertaining, relaxing, cooking and other outdoor activities. Their natural appearance adds aesthetic appeal to home exteriors...

  • How to Remove Deck Nails

    Loose deck nails can allow deck boards to warp and present a tripping hazard. As a deck ages, the foot traffic causes...

  • How to Remove Deck Boards

    Obviously, removing bad deck boards is necessary before installing new wood deck boards. Find out how to remove rotten, ugly, or otherwise...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!