How to Refill a Foaming Soap Dispenser

Foam soap lathers and rinses better than bar soap.

Once only found in commercial settings like doctor's offices and department store restrooms, foaming soap dispensers are a common sight in everyday homes. Foaming soap dispensers deliver a precisely measured amount of soap mixed with air. This mixture lathers and rinses easily and uses less soap than traditional dispensers do. Refilling a foaming soap dispenser is easy.

Things You'll Need

• Foam soap cartridge

Instructions

1. Insert the key that came with the soap dispenser into the slot on top of the dispenser. Push the key down and pull the front of the dispenser forward and down to expose the soap cartridge.

2. Pull the empty soap cartridge forward to remove it from the dispenser.

3. Set the new cartridge on top of the dispenser with the nozzle facing down and forward. Slide the nozzle assembly into the groove on the inside of the dispenser.

4. Close the front of the dispenser and push the top in until it clicks and locks shut.

5. Hold a hand under the dispenser sensor and check to make sure that soap comes out.

Tips & Warnings

• Do not attempt to refill the dispenser with regular soap, as this will clog the dispenser nozzle.

References

• Sloan: Sensor Wall-Mount Foam Soap Dispenser Installation and Operating Instruction Manual