Things You'll Need:
- Friends (to bring you rocks)
- A stake or post
- Rope
- Measuring tape
- Spray paint or chalk
- Duct tape
- A garden bench (optional)
-
Step 1
1st Ring with Stake and RopeThe first thing you need to do is to measure the space you will be using for your labyrinth. This information will help you decide how many circuits your labyrinth will have. For example, I had a little
over 43 feet square for my labyrinth. So taking into consideration that I wanted a center circle with a 4 foot diameter (to fit my bench), I wanted my pathways to be at least 18 inches wide for comfortable walking, and figuring that the rocks I would use would average about 4 inches in width, I decided that I could comfortably accommodate a 5 circuit Labyrinth. That's 4' + 2 ft (4"(X6)) + 1 1/2 ft (X5) = 43.5. (I ended up need a little less room than that.) -
Step 2
Working on the Second RingThe next step is to pick your design. Labyrinths have been around for centuries so I there are all sorts of styles from which to choose. I choose a medieval design which is based on a circle and my method works best for that design. You can easily find designs for 5, 6, 7, 9, and 11 circuit labyrinths on the internet.
-
Step 3
Send out an e-mail to all your friends and relatives, explaining your project and asking for rocks. Be very specific as to the size and shape rocks you desire. Give a time-frame for the project. I also told them about the Labyrinth Blessing Party I would have once the labyrinth was complete. The beauty of this approach is that you get the rocks gradually and no one is overburdened by work. You will be sending out periodic progress reports to serve as a reminder and a pep talk to your friends. This approach also creates a real feeling of community and
connectedness. -
Step 4
My Cat Encouraged me Every Step of the WayNow you can ready the space. Plant your stake (or post) in the center of your labyrinth area and attach a long rope to the post. You will be using the rope to help you mark the pattern for your labyrinth. You've already decided on the diameter of your center circle. Measuring from the stake, mark the rope with duct tape at half your diameter. Next, using spray paint or chalk and your duct taped rope as a guide, mark the circumference of your first circle onto the ground. You are now ready to receive your rocks!
-
Step 5
Rope Marks DiameterPlace the rocks along the marked section of ground. Then mark your second ring using the same method with the duct tape and rope as before. Continue this process until you have 6 circles of rock (for a 5 circuit labyrinth). It took about 2 months from my first e-mail to my Labyrinth blessing party. Rocks magically appeared as I had time to place them. Some days I went out to get my own rocks too. It was truly a group effort among a wonderful family of friends.
-
Step 6
Me Moving RocksOnce you've got your rings, you will be ready to arrange them into a labyrinth. Take up the stake, decide where your entrance will be and use your rope to mark a line across the center. If you have another rope, do this again to form four sections. This will make it easier to
arrange your rocks into the labyrinth design. Using your printed design as a guide, rearrange your rocks to match the design. Work slowly one section at a time stopping to reorient yourself as necessary. I think it's easiest if two people work together on this. When you think you've got it, walk the labyrinth and see. -
Step 7
My Son Daniel, at the Labyrinth Blessing CeremonyInvite all those who helped you to participate in a
thankful celebration. Enjoy!















Comments
sbayissuper89 said
on 12/17/2009 Yea! I have a labyrinth in my backyard too. It was so easy. Yours sounds like so much fun. I love to just travel the back yard. Good idea!