How to Install Wireless Cable Television to a Flat Panel TV

Save

If you are interested in installing a flat screen TV to your wall, you will be interested to know that there is a new technology for installing wireless cable TV that will make your life so much easier than hiding wires and cables.

  • Install your flat screen TV on to the wall or any other place you wish. If using a bracket, be sure to use the bracket that is compatible with your TV.

    Note, your TV will still need power so the power wire will be visible if you have not installed your TV over an electrical outlet to hide the wire.

  • Install the receiver end of your wireless cable transmitter into your TV. This works like an antenna that will receive signal from your cable box to your TV.

    Be sure the wireless transmitter is compatible with your TV. Most new model flat panel TVs will work with any transmitter but some will not.

  • Install the transmitter end of your wireless cable transmitter into your cable box. This will send cable video signal to your TV.

    Be sure to keep your transmitter and receiver with in the specified range. Most will be about 20 feet but some may be further.

  • If you are experiencing any difficulty with reception, try removing the other wireless devices from your room such as a wireless phone, wireless printer or baby monitor.

Promoted By Zergnet

Comments

You May Also Like

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!