How to Reset a GE Profile Dishwasher

Save

The GE Profile dishwasher is a sleek, modern dishwasher equipped with high-tech gadgetry --- like the SmartDispense II system that ensures sparkling dishes and a DeepClean cycle that will remove crusted-on food. According to the owner's manual, "reset" is used to change a cycle during washing. The "reset" button will sometimes refuse to respond, displaying 888 on the panel and necessitating a couple of quick tricks to ease it back into action.

Resetting the machine

  • PDW8000 series: press the reset button once. This will cancel the washing cycle and pump the water out of the machine.

    PDW9000 series: open the door an inch and wait for the machine to stop. Touch the reset button to cancel the washing cycle and reboot the panel.

  • If the machine is unresponsive, kill the power to the machine by turning it off on the wall switch (if applicable) or turning the circuit breaker off.

  • Leave the power off for 30 seconds, then turn the power back on.

Tips & Warnings

  • According to the GE Owner's Manual for the PDW9000 series only: If the "start/reset" light is flashing, close the door until the
  • water pumps out (this takes approximately 2 minutes) and the light stops flashing.
  • When the light stops flashing, the dishwasher can be reprogrammed and restarted.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!