A steering wheel puller helps you to remove a steering wheel from your vehicle once you have pulled out the center nut. The puller grabs onto the center hub while a screw pushes the steering wheel off the steering column. If you do not already own a steering wheel puller, there's no need to buy one; most auto parts stores will simply rent one to you for a nominal fee.
Things You'll Need
- Steering wheel puller
- Socket wrench
- Socket set
Place the arms of the steering wheel puller over the center hub of your steering wheel.
Thread the bolts that come with the steering wheel puller kit into the holes on your steering wheel. Every steering wheel that is designed to be removed with a puller has threaded holes in the center of the steering wheel; these holes are used to push the wheel off the steering column.
Tighten the bolts in the holes until the steering wheel slides off the steering column.
- "Automotive Tools Manual: Guide to Buying and Using Automotive Tools"; Thomson Delmar Learning; 1999
How to Install a Steering Wheel
The process of installing an aftermarket steering wheel on your car may not appear to be too complicated. However, there are a...
How to Use a Steering Wheel Lock Plate Remover
The steering wheel lock plate holds the steering column bearings in place while providing recesses for the steering wheel locking bolt to...
How to Use a Pulley Puller
Pulleys are typically pressed onto the shafts on which they mount. The outside diameter of the shaft is slightly larger than the...
How to Remove the Steering Wheel on a 1994 GMC
The steering wheel in your vehicle provides an important link between you and your vehicle's front tires, enabling you to turn them...
How to Remove a Wheel Hub Without a Puller
A steering wheel is a part of most land vehicles and is mass-produced for different types of automobiles such cars and light...
How to Use a Wheel Bearing Puller
Wheel bearing pullers are single-purpose tools that, depending on the application, are essential to the proper removal of wheel bearings. In most...
How to Use a Power Steering Pulley Puller
Power steering pulleys are usually fitted on the pump shaft by pressing and the assembly is held together with friction. Hence, if...
How to Use Bearing Pullers
Bearing pullers are specialized mechanical tools that pull the bearings off of axle shafts. Although there are many different types and designs,...
How to Adjust Steering Wheel That Pulls
Adjust a pulling steering wheel using a steering-wheel puller that attaches to the shaft with a taper fit; learn how from our...
Ford Steering Wheel Removal
All but the very earliest Ford automobiles use a two-piece steering wheel assembly, which consists of a steering wheel hub and the...
GMC Envoy Steering Wheel Removal
Removing a GMC Envoy’s steering wheel involves a few tools, a little muscle and one very special piece of equipment: a steering...