How to Burn an Oil Lamp

Save

When the electricity goes out during a summer lightning storm or winter winds take down power lines, burning an oil lamp is a good way to add some light to your home. As its name implies, an oil lamp (also called a kerosene lamp) burns oil to create light. Burning an oil lamp takes fuel and a means of igniting the fuel. The lamp needs to be lit, burned and extinguished properly in order to work effectively and safely.

Things You'll Need

  • Oil (kerosene)
  • Newspaper
  • Sharp scissors
  • Match or lighter
  • Fill the oil lamp with oil. Carefully lift the glass chimney off the lamp and set it aside. Unscrew the burner--the part that holds the wick--from the lamp and remove it. Fill the lamp with oil until it reaches a half-inch below the top of the lamp bowl. Screw the burner back onto the base of the lamp.

  • Clean the glass chimney if it's soiled with soot and smoke. Carefully stuff pieces of newspaper into the chimney as you turn it. When the glass is clean, remove the newspaper and discard it.

  • Trim the wick. Turn the knob on the burner to raise the wick up about a half-inch. Cut off the burnt part of the wick with a pair of sharp scissors. Lower the wick until only a quarter-inch is sticking out.

  • Light the wick with a match or lighter. Adjust the wick by raising or lowering it so the flame burns properly. If it smokes, the wick is too high and needs to be lowered. Turn it down just enough that the smoking stops. Replace the glass chimney on the base of the oil lamp.

  • Extinguish an oil lamp by cupping your hand at the back of the chimney top. Blow toward your hand. The air will put the flame out.

Tips & Warnings

  • Keep the lamp oil out of reach of children and pets. Store it in a cool, dry place away from heat.
  • Never burn an oil lamp without placing the chimney back on the burner. It will overheat and create a fire hazard.
  • Don't touch the chimney while you burn an oil lamp, as it gets very hot.

References

Promoted By Zergnet

Comments

You May Also Like

  • Lamp Oil Vs. Kerosene

    Fuel-burning lamps and lanterns can be used for various reasons. A tasteful lamp can change the ambiance of your home for a...

  • How to Repair an Oil Lamp

    Dating from antiquity, the oil lamp has remained a classic light source throughout the centuries. From bedouin tent to log cabin to...

  • How to Make Scented Lamp Oil

    Fill your home with the sweet scent of gardenia, roses and other flowers from your garden with homemade lamp oil. You can...

  • How to Color Lamp Oil

    With a few drops of special dye, you'll discover how easy it is to turn ordinary lamp oil into a veritable rainbow...

  • How to Replace an Oil Lamp Wick

    Oil lamps provide light without electricity by using a wick to absorb lamp oil and carry it from the lamp tank through...

  • How to Add Oil or Fluid to a Rain Lamp

    The original oil used in a vintage rain lamp was Drakeol #35 oil, but it is difficult to find today. The most...

  • How to Clean a Brass Eagle Oil Lamp Burner

    Oil lamps are a favorite of collectors, a cozy reminder of simpler times. Since they were a common household item, they are...

  • How do I Burn Mineral Oil in Oil Lamps?

    Mineral oil burns in oil lamps easily when blended lightly with other items. Making your own homemade lamp oil allows you the...

  • Homemade Lamp Oil

    This article discusses how to safely use oils in a homemade lamp- from how the process works to how to store oils.

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!