How to Find Spy Cameras
Spy cameras are used by corporations and individuals to invade our privacy every day. We don't see them because they are so small, and they're hard to find even if you know that one is there. The best solution is to use a spy finder device that has been made specifically to detect spy cameras by causing the spy camera's lens to betray itself. The spy finder device does not require any special skills on the part of the user but it does require patience to be used properly.
Other People Are Reading
Instructions
-
-
1
Hold the spy finder device up to your eye and look through the viewing port. Press and hold the button down to light up the LEDs.
-
2
Slowly scan one wall of the room from left to right while looking through the viewing port of the spy finder device. Continue until you have scanned the entire wall.
Scan the other walls in a similar fashion. -
-
3
Slowly scan the floor of the room from left to right until you have scanned the entire floor.
Slowly scan the ceiling of the room from left to right until you have scanned the entire ceiling. -
4
Stop scanning when you see a reflection of light from the area that is being scanned. Release the button on the spy finder device to turn off the LEDs.
Slightly shift your position relative to where the reflection was seen. Aim the spy finder device at the area where the reflection was seen and depress the button to light up the LEDs. -
5
Move the spy finder device slowly back and forth until the reflection is seen again. Move in closer until you come to the point on the wall or surface from where the reflection is coming.
-
6
Remove the spy finder device from your eye and release the button. Examine the point of the wall or surface where the reflection is.
Jab a hole in the wall or surface with a Philips screwdriver to reveal the spy camera.
-
1
Tips & Warnings
Don't assume that a room that has been checked for a spy camera is free of hidden devices the next time you go into it.
Reflections can be misleading so be sure to look at the supposed position of the spy camera from a number of positions to verify its position.
