How to Paint Interior Paneling
While many people enjoy the look of wood paneling, some homeowners seek a lighter, airier look, and feel confined by this design choice. Paneling can be removed, but usually involves the labor and cost of removing panels and installing sheet rock. An economical alternative to complete renovation is painting wood paneling. Properly preparing the wall's surface is key to creating a smooth, long-lasting finish. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Soap
- Rags
- Spackling compound
- Putty knife
- 100-grit sandpaper
- Pole sander, sanding block or orbital sander
- Tack cloth
- Blue painter's tape
- Drop cloths
- Medium nap paint roller covers (at least two)
- Paint roller
- Water-based primer
- Paint brush
- Latex paint
Instructions
-
Preparation and Paint
-
1
Clean the entire paneled surface well with soap and water, removing all greasy residue, dust and grime. Wipe the entire surface with a clean, wet rag to remove any excess cleaning product.
-
2
Use spackling compound and a putty knife to fill nail holes. Allow to dry according to directions on the container. When dry, sand any uneven areas with sandpaper.
-
-
3
Because most paneling is sealed, it has a slick surface, which will prevent paint from bonding. Using 100-grit sandpaper, go over the entire surface lightly with your choice of a sanding block, pole sander or orbital sander. The entire finish does not have to be removed, only the surface should be roughed up to allow the primer to adhere strongly.
-
4
Wipe all sanded areas with a tack cloth to remove sanded fragments. All remaining fragments will show when the wall is painted, so take care to remove all sanded remnants.
-
5
Protect all areas, such as ceilings and floors, surrounding the paneling to be painted with painter's tape and drop cloths.
-
6
Using a medium-nap paint roller cover, paint one even coat of primer on the wall, getting primer between the grooves of each panel. A paintbrush can be used to cover corners and edges. Allow the primed surface to cure, according to primer's instructions.
-
7
Apply latex paint to the wall in smooth, even coats. Two or more coats may be necessary.
-
1
Tips & Warnings
In place of a tack cloth, a clean damp rag may be used to remove sanding fragments.
A medium-nap roller cover will provide a smooth surface, while allowing enough nap to get in grooves between panels.
Never mix oil based paints and primers with those that are water based.
