Ripping a composite board, which is a plastic material made to resemble wood, with a circular saw can be a daunting chore if you are not equipped with the right tools. A ripping fence can be used with a circular saw to make it an easy task. The ripping fence is constructed of metal and slides into the slot built into the saw table. Composite boards are used to make composite decking, which is more durable, longer-lasting and requires less maintenance than real wood decks.
Things You'll Need
- Circular saw
- Ripping fence
Place the composite board onto a sturdy cutting surface.
Place C-clamps, or tack nails if clamps are not available, at each end of the composite board to securely attach it to the cutting surface so that it does not move during the ripping process.
Snap a line across the length of the board where the rip needs to be made. Cut straight along rip line with the circular saw until the blade buries into the material.
Adjust the ripping fence while the saw blade is still in the material being cut, so that it sits against the composite board. Tighten the wing nut so the ripping fence will not come loose during cutting.
Rip the composite board with the saw using both hands to keep the ripping fence against the edge of the board.
Tips & Warnings
- Unlike wood decking, you can not refinish composite decking when it shows signs of aging; you must replace it with new composite boards.
- Clean your composite decking several times a year to keep it in good condition.
How to Build a Circular Saw RIP Fence
Sometimes the simplest things work best. A rip fence for a circular saw is no exception. Few or no moving parts and...
Changing a Circular Saw Blade
Always unplug the circular saw before you attempt to change the cutting blade. Learn some safe and easy tips for changing blades...