How to Install Whirlpool Bathtubs
Installing a new whirlpool bathtub can be a rewarding but challenging task if you are not prepared beforehand. Make sure that you have all of the items you'll need, including tools, numbers for professionals and time to do the project, so that you have a successful and safe installation. Does this Spark an idea?
Things You'll Need
- Whirlpool, parts and template
- Plumber's putty
- Silicone seal
- Pipe wrench
- Circle saw
- Brackets
- Painter's tape
- Utility knife
- Circular saw with a diamond-tipped blade
- Shop vacuum
- Hole saw
- Drill, screwdriver and ratchet set
Instructions
-
Step to complete installation
-
1
Assemble all tools and supplies in the bathroom, and then shut off water and remove the old bathtub.
-
2
Use the template provided with your new bathtub, taping it in the center of the work area.
-
-
3
Test the whirlpool and other fixtures to ensure they align and fit securely. Cut a panel to access pipes for later maintenance.
-
4
Build your drain assembly and put it in place, using plumber's putty and following manufacturer's directions.
-
5
Have an electrician connect the power supply to the current breaker box using a dedicated circuit or building a new breaker box.
-
6
Place whirlpool tub in framework, apply sealant to edges to protect from water damage and test the motor to ensure that it is working correctly.
-
7
Turn on water and enjoy.
-
1
Tips & Warnings
Ask for others to help take out the old tub and lift the whirlpool.
Check for any water damage once you remove the tub. Do any repairs needed at this time.
Once you turn on the water, check the pipes for any water damage.
Using an electrician to run the motor for the whirlpool is your safest option. Many homes, especially older ones, may need a new circuit breaker box. Use caution at all times when working with water lines or any electrical appliance.
