How to Drain an Intex Pool

Save

Intex has a number of different model pools available for purchase, and they all drain in the same easy fashion. If you follow the proper steps you should be able to drain your Intex pool without any problems, but if you do encounter difficulty, there are other easy methods that can be applied to successfully drain your pool.

Things You'll Need

  • Garden Hose
  • Intex Drain Plug Connector (Part No. 10184)
  • Locate the drain valve on the outside of the pool and remove the cap.

  • Place a hose on the ground with the female end lying next to the pool (near the drain valve) and the male end in an area where water can safely be emptied.

  • Attach drain plug connector to the hose and screw into the drain valve. Water will start to drain.

  • Once all the water that can be drained using the hose has emptied, flip pool over to empty out the rest of the water.

Tips & Warnings

  • If your Intex pool did not come with a drain plug connector (or you have lost it), you can order one from www.intexstore.com (see Resources).
  • If the drain plug connector does not work, even after replacing, use a manual or powered water pump to remove the water in a short amount of time (see Resources)
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!