You should drive a car with a blown head gasket only as a last-resort emergency. The longer you drive the vehicle, the more you'll damage the internal parts. Long-term use can compromise the entire engine. These steps assume that you are at a location where you have access to oil and coolant.
Things You'll Need
- 5-gallon oil drain pan
- OSHA-approved oil and coolant disposal container
- 3/4-inch wrench
- Oil filter wrench
- Oil filter
- Oil fill funnel
- 5 quarts of oil
- Coolant fill funnel
- 2 gallons of coolant
Allow the vehicle to completely cool down.
Place the drain pan under the coolant drain valve at the bottom of the radiator. Open the drain valve by turning it counterclockwise by hand, and let all the coolant drain out.
Dispose of the old coolant in an OSHA-approved container.
Reposition the drain pan under the vehicle's oil drain plug. Remove the oil drain plug, using the 3/4-inch wrench to turn it counterclockwise, letting all the oil drain out.
Remove the oil filter with the oil filter wrench, and replace it with new filter.
Close the oil drain pan plug with the wrench. Use the oil fill funnel to fill the oil pan with 5 quarts of the oil recommended for your particular vehicle.
Close the coolant drain valve by hand, and use the coolant fill funnel to fill the radiator with 2 gallons of coolant---or until the coolant level is up to the level marked on the overflow container.
Drive your vehicle directly to a service station that is as close as possible. You should drive no more than a mile away, as the engine will overheat and be further damaged. Shut off the engine as quickly as possible, and let the mechanics take it from there.
Tips & Warnings
- If the head gasket is blown, you will see oil mixed with the water when you drain the oil.
- Driving the car with a blown head gasket is not advisable unless no other option is available. It would be better to call a wrecker and have the vehicle towed to a service station.
- Do not handle engine parts, coolant or oil until they have completely cooled down.
- How Long Can You Drive on a Bad Intake Manifold Gasket?
What Causes a Blown Head Gasket?
The head gasket is a seal that joins the engine head with the cylinder. When the engine overheats, the metal expands and...
What Is a Car Head Gasket?
Almost every engine ever made has a head gasket of some sort. These gaskets must perform consistently under very harsh conditions to...
How to Seal a Blown Head Gasket
An engine's head gasket serves the purpose of sealing the automobile's engine cylinders against water or coolant from elsewhere in the engine....
How to Trade in a Car With a Blown Head Gasket
A blown head gasket allows coolant to seep into the combustion area where it is converted to steam and smoke. The resulting...
How to Prevent Blown Head Gaskets
A head gasket is a necessary component in combustion engines. It allows the fuel to ignite and separates the engine coolant from...
Indications of a Blown Head Gasket
The head gasket's job is to provide the engine block with an airtight seal and prevent fluids in the engine block from...
What Are the Dangers of Driving an Overheated Car?
Nearly all vehicles manufactured these days come with internal combustion engines, which are notorious for being very inefficient because they produce a...