How to Grout a Shower Surround
If you have installed new tile in your shower surround area, it will need to have grout applied to it. Grout can also be applied over existing tile that has damaged or stained grout. Doing so can freshen the look of the tile enough that it won't all have to be replaced. The process of applying grout does not take long. You can do it yourself in less than a day. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Read the directions on the bag of grout carefully. Put the grout mixture into the bucket. Add the water and stir well. The amount of mixture and water you will need depends on the brand and amount of grout you are using. Stir the mixture well, until all powder is completely dissolved and the substance is thick.
-
2
Remove all spacers from between tiles. Make sure the mortar is completely set before doing so or your tiles may shift and slip out of place.
-
-
3
Apply the grout to the shower surround wall surface. Cover the entire surface. Use the trawl to dip into the grout mixture; then smooth it onto the wall. Use the trawl to fill in all cracks between tiles evenly. Using a side to side, left to right motion helps to do this.
-
4
Use a soft damp cloth to remove all grout mixture from the tiles, but not from in between the tiles. It is important to get the mixture off of the tiles before the grout drys.
-
5
Allow the grout to set and dry for at least 48 hours before using the shower. Using the shower before the grout is set may result in damage and the need to apply grout again.
-
1
Tips & Warnings
Take your time. Seal the grout after an appropriate drying period, to prevent shower water from penetrating.
Ventilate the area well when using grout.
