How to Connect a CCTV Camera to a Computer

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

One of the problems in connecting a closed circuit television (CCTV) camera to a computer is that generally the computer is nowhere near the camera. If you want to monitor activity at your front door, you'd mount the camera in the hallway, right? That's nowhere near the computer, which might be in the den. The solution is to use a home-wiring network called a powerline network.

Step 1

Position your camera. Select a location that isn't pointing directly into a light source. Make sure the camera is shaded and the subject area is well lit. Check that the subject—say a door--is within the frame of the camera. The user manual will tell you the range that the camera will be able to capture a 6-foot person's full image. It's often only 2.5 meters at night using a day/night camera.

Advertisement

Video of the Day

Step 2

Determine the method of mounting the camera. Cameras can be mounted using window suction mounts, which is convenient and easy to do.

Step 3

Plug the supplied receiver into the wall adjacent to the computer. The receiver and cables come with the kit and are the interface between the computer and the powerline network. Plug the receiver into a spare USB jack on the computer.

Advertisement

Step 4

Install the software on your computer. There will be a disk that came with the kit. Check the box. Place the CD in the drive and follow the prompts to run the install wizard. The prompts will ask you if you'd like to set up a remote viewing account, which allows you to see images from your camera over the Internet. It will test the system, and it will prompt you to connect and name the camera. At that point go back to the camera.

Advertisement

Step 5

Plug the camera into the camera's power supply and the power supply into the nearest outlet. You will be using the home's wiring to carry the signal to your computer.

Step 6

Go back to the computer and continue the wizard. Identify the camera in the software and name it.

Advertisement

Step 7

Focus the camera. You'll need help to do this. One person needs to be at the camera and the other needs to view the image in the software's home screen.

Advertisement

Advertisement

Video of the Day

Report an Issue

screenshot of the current page

Screenshot loading...