How to Search Codes With RCA Systemlink 3 Remote Transmitters

Save

Universal remote controls allows users to operate multiple entertainment center devices with one remote. You can reduce the clutter and confusion of having to use a different remote control for each device by using a universal remote. The RCA Systemlink 3 allows you to operate up to three devices with one remote. It can be programmed by manually entering a specific code for each device.

  • Turn on the device you want to program to operate with the Systemlink 3 remote control.

  • Press and hold the "Code Search" button until the indicator light turns on and then push the button on the remote you want to program. Your options are "TV," "VCR/DVD" and "DBS/CABLE." The indicator light will blink when you press the button.

  • Point the remote control at the device and press the "Off/On" button on the remote control. The remote control automatically tries different codes to operate the device.

  • Push the "Enter" button on the remote control when the device turns off. The "Enter" button must be pressed within 3 seconds of the device turning off or the correct code will not be saved.

  • Test the saved code by pressing the "Off/On" button. If the device turns on the code was saved successfully. If it does not turn on, repeat Steps 1-4.

Tips & Warnings

  • If you do not know the codes for your devices, you can use an automatic search function to find the code and program your remote control.

References

  • RCA RCU300 Universal Remote; Thomson Inc.; 2003
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!