How to Replace the Belt on a Hoover Savvy
When your Hoover Savvy vacuum cleaner begins to lose sucking power, it may be time to replace the belt. Vacuum cleaner belts generally need to be replaced every three to six months. The belt for the Hoover Savvy is inexpensive, costing well under $10. You can change the belt on the Hoover Savvy relatively quickly and your vacuum cleaner should once again be working like new. Does this Spark an idea?
Instructions
-
-
1
Turn off the Hoover Savvy vacuum cleaner. Turn the vacuum upside down on a stable surface.
-
2
Remove the screws holding the bottom plate and agitator in place. The agitator is the roller brush on the bottom of the appliance.
-
-
3
Slide the agitator brush out of place. Note how the brush is in position so that you can easily replace it once the new belt is on.
-
4
Pull the old belt off of the agitator. It should then simply fall off of the drive shaft.
-
5
Remove the opposite side cover that is above the height adjustment knob. Use a screwdriver to remove the five screws.
-
6
Feed the new belt through the noticeable gap and around the agitator brush. You will now see a loop. Put the agitator through this loop.
-
7
Check to make sure the new belt is sitting on the grooves of the agitator brush. Put the agitator back into position and screw everything back into place.
-
1
