How to Restore Plastic Lawn Chairs


You don't have to put those plastic lawn chairs out on the curb just because they no longer look brand new. Instead, revitalize them with a thorough cleaning treatment and a secret substance for a factory-fresh shine: car wax.

The Brush-Off

  • If the chairs have sat unused outside or even the garage for months on end, they may be covered with cobwebs, dust or dirt. Wipe them off with a dry rag or soft brush to remove all the loose debris; brush off the underside area as well. Spray the chairs down with a mist of the garden hose; then select a "jet" or powerful spray setting to knock off any dirt trapped in the textured plastic resin.

Baking-Soda Scrub

  • Sometimes, dirt bakes into the plastic a bit, or the plastic becomes discolored from pollution and particles into the air. If those chairs still look unsightly after a spray of the hose, wet them again; then rub them down with a nylon scrub pad. These pads remove gray discoloration that sits on the surface of the plastic. Follow up with a little baking soda sprinkled on a wet sponge to remove excess dirt. An old toothbrush reaches into the grooves and textured areas molded into the chairs. Baking soda serves as an alternative to harsh chemical cleaners that may damage or bleach the plastic resin.

Power Wash

  • Sometimes the discoloration is so embedded in the plastic that even a mild abrasive doesn't remove it. In this case, a power washer often does the trick. Select a gentle setting on the power washer at first to avoid damaging the chair; try several different settings until you find one that cleans the chair well without carving grooves into it. The power washer removes a thin layer of plastic and may leave the surface a bit rough in some areas. If this happens, sand the chair smooth with a fine-grit sanding block.

Restoring the Shine

  • Once the chair is clean and smooth again, it's ready for a wax treatment. Rub an automotive paste wax over the chairs with a soft rag, allowing it to set for several minutes or as recommended on the packaging. Wipe off the excess wax with a clean soft rag afterwards. Do not wax the chairs if you think you'd like to paint them eventually, as the wax prevents the paint from adhering well.

Related Searches


  • Photo Credit Jan Tyler/iStock/Getty Images
Promoted By Zergnet



You May Also Like

  • How to Repair Patio Chairs

    Patio chairs are built with materials meant to survive through extreme weather conditions, including harsh UV rays, freezing cold, temperature fluctuations and...

  • How to Repair Resin Furniture

    Mainly used outdoors as patio or deck furniture, resin furniture is made of shiny hard plastic that comes in various colors, green...

  • How to Restore the Finish on Vinyl Patio Furniture

    Vinyl patio furniture is a popular alternative to fabric and foam cushion furniture, which can easily become mildewed. Vinyl is durable like...

  • How to Restore Resin Patio Furniture

    Resin is a strong and durable material often used in the construction of patio furniture. This type of furniture tends to resemble...

  • How to Restore Faded Plastic Outdoor Play Equipment

    Outdoor play equipment, including jungle gyms and swing sets, are specifically designed for use outside, but that doesn't mean the pieces hold...

  • How to Repair Resin Chairs

    Resin chairs are made from a type of hard, flexible plastic. This plastic is used to make indoor and outdoor chairs. Some...

  • Plastic Wicker Repair

    Wicker has become very popular for both indoor and outdoor furniture in recent years. For outdoor in particular, plastic wicker is a...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!