How to Build a Wood Bicycle Rack

Save

Besides your automobiles, the largest items you may need to store in your garage are bicycles. If you have children, you know what a hassle storing bikes can be. More often than not, bikes end up thrown on the ground because there is no place else to put them. A bike rack is an easy-to-build solution to your bicycle storage problem. A rack can keep your bikes together and provide a place to secure them.

Things You'll Need

  • Pencil
  • One 2-by-6, 7 feet 7 1/2 inches long
  • Two 2-by-4s, 7 feet 7 1/2 inches long
  • 13 2-by-4, 4 feet long
  • 12 2-by-4, 6 inches long
  • Drill with screwdriver bit
  • Wood screws
  • Lay the 2-by-6 board on a flat surface. Place one of the 7-foot-plus 2-by-4 boards on either side of the 2-by-6 so the 4-inch sides of the 2-by-4s are resting against the 2-inch sides of the 2-by-6.

  • Attach the 2-by-4s to the 2-by-6 using three 3-inch screws on each side. Once completed, this structure should measure 7 feet 71/2 inches in length, 4 inches in height and 10 inches in width. From the side, it should resemble a U.

  • At either end of this long piece of wood, screw in one of the 4-foot-long 2-by-4s. This pieces should be centered vertically on the 2-by-6 and form an L with the board. The smaller side of the 2-by-4 will be horizontal, and the longer side will be vertical.

  • Measure 6 inches from the end of one of the 4-foot 2-by-4s toward the center. This mark will be where the edge of the next 2-by-4 is. Screw another 4-foot long 2-by-4 in this location, making sure there is a 6-inch space between boards.

  • Continue adding 4-foot-long 2-by-4 boards at 6-inch intervals until you have used all the boards.

  • Screw the 6-inch pieces of 2-by-4 between the 4-foot 2-by-4 pieces so the top of the 6-inch pieces are even with the top of the 4-foot pieces. This will fill in the gaps between the boards.

Tips & Warnings

  • This rack will hold 12 bicycles. If you want a rack that will hold less, adjust the length of the base boards and cut down on the number of 4-foot boards.
  • Board placement is extremely important for this project. Make your measurements exactly, or you won't be able to fit the bikes in properly

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!