How to Thread a Singer Electronic Control Easy Thread Machine
Singer sewing machines are designed for ease of use by their customers. Their goal is to ensure the user has no trouble using and operating the sewing machine, regardless of their needs. With the easy thread sewing machines, threading the machine has been made much simpler than previous versions. It is designed with large hooks and slits for the thread to run through. It also uses as few parts as possible to still accomplish the same tasks without any extra work on the user's end.
Instructions
-
-
1
Turn the sewing machine off before threading it for your safety.
-
2
Turn the hand wheel of the machine, located on the back, toward you to raise the needle. Raise the needle until it will go no higher.
-
-
3
Push the lever behind the presser foot of the sewing machine to raise it. This is the part underneath the needle that holds the fabric in place while sewing.
-
4
Slide the spool of thread onto the spool pin and make sure it is firmly in place.
-
5
Pull the end of the thread off the spool and bring it over to the thread guide located on the left side of the machine when you are facing the front of the machine. Pull the thread through the small groove on the left side of the thread guide and bring it up through the slit in the front of the thread guide.
-
6
Pull the thread over the top of the machine and down to the right side. You'll notice two slits. Pull the thread through the slit on the right first. It runs almost to the bottom of the machine. When the thread reaches the bottom, hook it underneath the corner created by the slit and pull it up through the slit on the left.
-
7
Hook the thread through the hook on the top of the left slit. Look for a small, round protrusion on the back of the presser foot and slide the thread through it. Then thread it through the hole in the needle from back to front.
-
1
