Things You'll Need:
- Metal spray paint
- Sandpaper
-
Step 1
Purchase two tones of metal spray paint for your metal finish. Use direct to metal spray paint so you don't need a metal primer. Choose the metal color you want and a color that will serve as a dark tone of the metal color. If you are using a gold color, for example, you would also choose a dark brown. If in doubt, black is versatile and can be used as the dark tone for any metal color. Choose matte spray paint if you want a look of old metal that is dulled, not shiny. Use gloss if you want to keep it shiny.
-
Step 2
Set up your area for spray painting. Spray outdoors or in a well-ventilated area. Line your working surface with newspapers.
-
Step 3
Thoroughly clean the object to be painted. Scouring pads and degreaser can be used to remove any gunk or grease.
-
Step 4
Paint light wisps of the darker tone so that it gets into the cracks, corners, crevasses and elbows of the object you are painting. Use light coats so the paint doesn't pool or drip. It is fine if a bit of paint gets on other areas of the object.
-
Step 5
Let this coat dry and then wet sand flat surfaces and raised areas with 220 grit followed by 320 grit wet sand paper. Sand so the dark tone is mostly sitting in the cracks and corners and so there is a slight gradation of tone that gets lighter as it comes out of those areas.
-
Step 6
Paint light wisps of the lighter tone so the paint falls onto the flat surfaces and raised areas. Spray so that it blends with the gradation of the darker tone.
-
Step 7
Let this coat dry. Lightly sand and repeat this process if necessary. You are basically giving a stained look to the metal.
