How to Replace a Crossfire Cabin Air Filter


The Chrysler Crossfire is a compact sports car that shares many chassis components with the Mercedes SLK. This is due to a Chrysler partnership with Mercedes Benz (Daimler-Benz) that lasted until 2007. The Crossfire uses a cabin air filter that is not used on any other Chrysler vehicle; the filter is actually a Mercedes part, but can be purchased at your Chrysler dealer.

Things You'll Need

  • Phillips screwdriver
  • Replacement cabin air filter
  • Look closely underneath the passenger side of the dash to find the lower dash panel. The lower dash panel is attached by two screws and two clips.

  • Remove the two Phillips screws from the top portion of the lower dash panel. Lower the panel and release the clips on the bottom.

  • Examine the cabin air filter panel to find the sliding clips. Pull the front clip up and push the rear clip down. Due to the Crossfire's unique dash setup, the cabin air filter is mounted vertically.

  • Remove the panel and set it aside. Pull out the old cabin air filter and discard it. Clear any debris from the cabin air filter housing and insert the new filter.

  • Attach the cabin air filter cover and secure the clips. Replace the lower dash panel, secure the clips and tighten the Phillips screws.

Tips & Warnings

  • Chrysler recommends using Mopar factory replacement filters for your Crossfire.

Related Searches


Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!