When the Kenmore washer seems to be taking a long time to fill, you may have to replace the water inlet valve. Remove the water filter from the machine to inspect, test or replace it if necessary. The water filter is also known as a water inlet valve. The water supply passes through screens that filter the sediment. When the valves become clogged and cannot be cleaned, the water inlet valve should be replaced.
Things You'll Need
- Putty knife
- Masking tape
- Needle nose pliers
- Socket wrench set
Unplug the Kenmore washing machine from the wall outlet, and turn the water supply off to the washer. The water shutoff valves are located where the water spigots come out of the wall.
Pull the Kenmore washing machine away from the wall to access the back of it.
Place a bucket directly under the area where the water hoses connect to the rear of the washer. Turn the hose connections counterclockwise, and remove the hoses from the washer. Set the loose ends of the hoses inside the bucket to catch any water left in them.
Use a screwdriver to remove the screws that secure the front of the control console to the washer. Maneuver the control panel out of the way without disconnecting any wires.
Insert a putty knife between the front panel and top panel, locating the retaining clips that secure the top panel. Press in to disengage the retaining clips, and lift the top panel off the washer.
Locate the water inlet valve inside the rear panel of the washer. Use a screwdriver to disconnect the hose from the water inlet valve to the spout over the tub.
Use pieces of masking tape to label the wires attached to the water inlet valve solenoids. There are two wires for each solenoid.
Use needle nose pliers to disconnect the wires from the water inlet valve solenoids. Grab the wires at the leads, and pull them off the terminals. Do not grab the wire itself as this may cause the wire to break.
Use a socket wrench to remove the two bolts that secure the water inlet valve to the rear panel of the washer. Pull the water inlet valve out of the holes, and take it with you to purchase a replacement.
Tips & Warnings
- Always disconnect power from appliances before working on them.
How do I Troubleshoot Kenmore Washer He2 110-4646 2500?
Kenmore high-efficiency washers are designed to help save money on utility bills and to save water and energy. The Kenmore Washer He2...
How to Remove the Water Filter in a Kenmore
If the water dispensed by your Kenmore refrigerator tastes a little funny, it might be time to remove the water filter so...
How to Remove the Inlet Water Filter in an LG Washer
The inlet water filter in your LG washer helps to clean out any impurities that might be in your home's water supply,...