eHow launches Android app: Get the best of eHow on the go.

How To

How to Replace RC Car Tires

Contributor
By Jennifer Eblin
eHow Contributing Writer

RC cars, trucks and other vehicles are capable of lightning fast speeds of up to 80 mph. These cars run through tires fairly quickly if you're racing, and even weekend hobbyists will find that the tires need changing every now and then. It's easy to replace RC car tires if you know the type and style.

Difficulty: Moderately Easy
Instructions

Things You'll Need:

  • 4-way wrench
  • New tires
  • Glue
  • Rubber bands
  1. Step 1

    Determine the type of tires you're currently running on your vehicle and decide if that's the same type you want to run in the future. RC car tires come in five varieties: drift, bowtie, ribbed, all-terrain and street. Drift tires are used for racing, bowtie are used for tracks, ribbed have more grip for softer conditions, all-terrain work on all surfaces and street tires are used only on paved surfaces.

  2. Step 2

    Turn the RC car over on one side and place it on a flat surface to give you a better working area. Take off the factory nuts by using a 4-way wrench and remove the old tires. Keep the nuts in your pocket or another safe place where you won't lose them.

  3. Step 3

    Position the new tires into place on the car, making sure the directional treads face the right direction and point toward the front of the car. Also, make sure that you place the wider tires on the back of the car and the thinner ones on the front of the car.

  4. Step 4

    Apply a thin coat of glue to the tire and position the rim onto the tire. Most beginners don't realize that RC car tires are glued into place, but this is the only way to keep the tire and rim connected during even routine runs. Place a rubber band around the tire and rim and leave it in place until the glue dries. This helps set the rim and prevents it from falling off.

  5. Step 5

    Turn the car over after you've replaced both tires on the one side and the glue dries. Remove the rubber band and repeat the steps on the other side. Once the glue dries and you've taken off the rubber bands, the RC car is ready to run.

Tips & Warnings
  • Consider switching to a different type of tire if you notice that your car is running slower, or has problems handling the terrain. You might notice a significant difference just by changing to a new tire.
  • Don't run the RC car unless you're sure the glue dried. If the rim falls off the car, you'll need to replace the tire again and change the glue.

Comments  

Flag This Comment

on 11/4/2009 hi i found your article very interesting and knew that the best thing to do would be to contact you and politly ask if you would be so kind as to put my website into any relivent articles that you right

http://www.rcthingz.com/

Subscribe

Post a Comment

Post a Comment

Related Ads

  • Have you done this? Click here to let us know.
I Did This
Tags
Get Free Hobbies, Games & Toys Newsletters

Copyright © 1999-2009 eHow, Inc. Use of this web site constitutes acceptance of the eHow Terms of Use and Privacy Policy.   en-US Portions of this page are modifications based on work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

eHow Hobbies, Games and Toys
eHow_eHow Hobbies, Games and Toys