How to Get Into Setup on Acer Aspire AMD K-6 333Mhz
It's hard to keep up with all the changing technology of today's computers. That's why it's comforting to know that some older machines, like the Acer Aspire AMD K-6 333Mhz, are still perfectly good machines. You might have to access the system setup in order to make enough changes for it to work, but the only tool that this requires is a finger.
Other People Are Reading
Instructions
-
How to Get Into Setup on Acer Aspire AMD K-6 333Mhz
-
1
Remove any CDs or disks from the drives. Power down the computer.
-
2
Turn the Acer Aspire on.
-
-
3
Hold down the ":Ctrl", "Alt" and "Esc" keys at the same time as the machine starts to boot.
-
4
Some versions of the Acer Aspire might first go to the Acer splash screen. In this case, wait until you hear the beep and then press "Ctrl", 'Alt" and "Esc" simultaneously.
-
5
Release "Ctrl"/"Alt"/"Esc" when you see the BIOS setup screen.
-
1
Tips & Warnings
Depending on the model, the specific keyboard setup might be different. Watch the screen as the Acer boots up. It should display the exact keyboard sequence needed to access setup. If you can't get into the setup for some reason, you might be able to reset the BIOS. Check the instructions that came with your system or motherboard.
Make a note of any setup changes in the BIOS before you start altering any of the setup parameters. Some BIOS will let you write the file out to a disk for safekeeping.
