How to Get My Nintendo DS Screen Fixed
The Nintendo DS console comes with two screens: one at the top, which is used for viewing graphics, and one at the bottom, which is touch sensitive. Since most games rely on both screens, if the top screen should develops a crack or the backlight appears uneven, it should be repaired. This can be done without damaging the bottom touchscreen and will allow games to be played again in their normal way.
Other People Are Reading
Things You'll Need
- Replacement Nintendo DS LCD top screen
- Phillips screwdriver
- Clean, soft towel
Instructions
-
Replacing a Nintendo DS Defective Top LCD Screen
-
1
Place the clean, soft towel on a workspace and place the Nintendo DS face down on the towel. Make sure the replacement LCD screen is nearby.
-
2
Run the Nintendo DS until the battery dies down. Turn the Nintendo DS off.
Take the Phillips screwdriver and unscrew the back of the top LCD screen only. Put the screws aside. -
-
3
Remove the motherboard from its connection to the the top LCD screen carefully. Hold onto the motherboard while taking the top LCD screen out from its position, then put it down. Remove the three tiny ribbon connectors from the LCD screen that go to it from the circuitboard. Put the LCD screen aside.
-
4
Snap the replacement LCD screen into position in the top of the case. Attach the ribbon connectors to the LCD screen. Put the motherboard back in against the LCD screen.
-
5
Put the screws back in. Charge the Nintendo DS, then turn it on.
-
1
Tips & Warnings
All repair work should be done on a clean and tidy surface with bright light. Avoid walking on carpets before working on the Nintendo DS, since that can cause static electricity, which could damage the console.
Any repair that is done to a Nintendo DS by the owner will void the warranty. This could make it rejected by an authorized dealer or Nintendo for another repair, even if it doesn't have anything to do with the screen.
