How to Remove Shower Doors
Shower doors are an attractive addition to any bathroom, but there may come a time when they need to be removed. Whether you prefer shower curtains or simply want to replace existing doors with a new set, this is a do-it-yourself project that can easily be accomplished in a single afternoon. Although removing the doors is not difficult, care should be taken not to damage the tub any more than is necessary during the removal. If you have a Fiberglas tub or tub surround, small screw holes will be left where the shower door tracks attach to the tub. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Get inside the tub and grab the door that is on the tub side of the track with one hand on either side of the door. Lift up until the bottom of the door is clear of the track. Pull the bottom of the door toward you as you pull the top of the door out of the frame. Repeat these steps with the second sliding door.
-
2
Remove all visible screws from the inside of the metal frame attached to the tub and walls. If the frame easily detaches after removing the screws, remove it. If the frame remains attached to the tub and walls, do not try to break it free.
-
-
3
Use a putty knife or razor blade to gently score the caulking around the inside and outside edges of the door frame. Do this on the tub and on the walls, being especially careful not to cut into the wall or tub.
-
4
Gently pull each wall frame until it detaches. Remove the frame that is attached to the tub.
-
5
Use the putty knife to scrape off any remaining putty from the tub and walls.
-
1
Tips & Warnings
Fix the holes left in the walls by filling them with putty or joint compound, then sanding and painting. Fix the holes in the tub by filling them with caulk (only works if your tub is white or cream). It may take several applications of caulk until the hole is no longer visible. If the tub is colored, have a professional refinish it.
