Most wood furniture stored outside needs to have a finish to protect it from warping, rot and insect infestation. When wood is exposed to the elements year-round, it can become unattractive and even unusable. Proper surface preparation and finishing are necessary to extend the life of your wood furniture.
Things You'll Need
- Wood furniture
- Wood preservative
- Rubber gloves
- Dishwashing liquid
Treat your wood furniture with a preservative, available at most home supply stores. Furniture made from cedar, redwood, oak and pine needs a preservative to prevent decay and rot. Preservatives are water-based or oil-based, but only water-based products are approved for extended contact with people. Because penetration is different for different types of woods, make sure the preservative you choose will work well with your specific grain. Apply the preservative with a paintbrush in a well-ventilated area.
Apply a coat of polyurethane after the preservative has dried. The polyurethane will add a protective layer over the preservative, improving its water resistance and durability. The polyurethane you select will depend on the wood grain and your color preference. Apply one coat at a time, adding another coat if you want a deeper color or if the manufacturer's instructions call for it.
Clean the wood furniture at least once a year. Add 1 tbsp. of bleach and 5 tbsp. of dishwashing liquid to 1 gal. of water and gently wash the furniture with a sponge or soft bristle brush. Rinse the furniture and let it dry completely outside.
Touch up spots that have experienced wear and tear with polyurethane or stain. Covering the furniture with a waterproof tarp is also recommended, especially during the winter.
Tips & Warnings
- The fumes from polyurethane and preservatives can be noxious, so apply them in a well-ventilated area. Rubber gloves should be worn when applying polyurethane or preservatives.
What is Spar Urethane?
Spar urethane is a protective clear coat finish that has been specially formulated to use on interior or exterior wood surfaces exposed...
Differences Between Epoxy & Polyurethane Resin
At a basic, chemical level, epoxy resin starts with the reaction of bisphenol A, which contains a benzene (carbon) ring and a...
How to Use Polyurethane
Polyurethane is a reliable, long-lasting oil or water-based wood finish that is available in interior and exterior formulas. The interior formulas are...
How to Preserve Outdoor Wood Furniture
The object of preservation is twofold: to prevent moisture from entering the furniture and to prevent rot and decay. Many widely used...
How to Protect Teak Furniture
Tectona grandis, or teak, is a hardwood product indigenous to Indonesia. Used in the production of high-end deck and patio furniture, teak...
How to Protect Teak Wood
Teak wood is high in natural oils that make it resilient to water damage and rot. Teak is often used for outdoor...
How to Protect a Wood Sculpture Outside
Outdoor wood sculpture can take many forms, from animal to human to abstract. Whether it's highly polished or hewn with a chain...
How to Protect an Outdoor Wood Bench
You want your new outdoor bench to last for years. Or, your older wood bench is beginning to look plenty worn after...
The Longest-Lasting Exterior Wood Preservative
Exterior wood is constantly exposed to the damaging forces of nature, including direct sunlight, precipitation and wide fluctuations in temperature. Clear, film-forming...
Can Interior Polyurethane Be Used Outside?
When shopping around for polyurethane products to seal wood, the differences between products seem simple enough: Some are made for exterior surfaces,...
Are Polyurethane Clear Finishes for Exterior Use?
Homeowners often wish to show the beauty of quality wood on exterior doors and trim with a clear finish. This can cause...
Can You Put Exterior Varnish Over Interior Paint?
If you're wondering whether you can put a coat of exterior varnish over interior paint, the quick answer is "yes." The most...