Things You'll Need:
- 4" diameter pvc 2 inches shorter than the arrows
- pvc glue
- A sheet of leather or cloth (suggest camo) that is 4" 1\2 x length of pvc
- Pvc plug or circle of wood 4" diameter
- circle of foam 4" diameter
-
Step 1
A pvc pipe quiver can be used for target archery or hunting. when padded the quiver is quiet and almost indestructible(padded or not).Whether your do archery for sport hunting, target shooting or an interest in traditional archery..a pvc pipe quiver is great.
Lay out the pvc pipe. First attach the fabric you have chosen by laying out the fabric and applying the pvc glue to the pipe. You can slowly roll the pipe over the fabric making sure it sticks and if there is any excess on either end you can fold it into the tube and glue it down.
You will now plug the end of the pipe by either using a plug that you can buy and glue it in place or use a circle of wood that you can glue in place. -
Step 2
Now that you've plugged one end of the pipe and applied the fabric you can now put a piece of foam in the bottom of the tube if you want it to be as quiet as possible and also pad the inside of the tube but its not necessary unless you want absolutely silence. Padding the bottom will also prevent broad heads from dulling.
-
Step 3
Now you've done everything except mount a strap to hold the quiver either on your belt or back. You can easily mount the quiver on your belt by drilling a hole into the quiver and running a string through it and tying it to your belt or attach a metal ring to the quiver and run your belt through it.
If you would rather use the quiver on your back then mount a strap at the top and bottom of the quiver by drilling two holes and run a cord through the holes and tie knots on the end of each so the cord wont slip through. make sure that the strap slides comfortable over your shoulder.
