How to Make Home Theater Speaker Mounts for Your Ceiling
If you have hunted around your local department store for speaker mounts to complete your home theater, then you have noticed that buying a complete set can be fairly expensive. In this article I will show you how to easily make your own at the fraction of the price!
Things You'll Need
- "L" Brackets from your local hardware store
- Variety pack of nuts, bolts and screws
Instructions
-
-
1
The simplest way to fabricate your own home theater speaker mounts is to truck on down to your local hardware store and pick up some simple "L" brackets. You need to purchase one per speaker for the ones that you want to mount from your ceiling.
-
2
There are many different sizes available and you need to make sure you purchase "L" brackets that are long enough on each side to clear the speaker from the ceiling.
-
- 3
-
4
Bend the "L" brackets into the correct angle that will be aiming towards your listening position. It is much easier to mount the pre-bent "L" brackets on the ceiling using a screw driver or cordless screw driver and appropriate size screws supplied with the nut and bolt kit you purchased before securing the bracket to the speakers.
-
5
When you have secured all the brackets to the ceiling, you can paint them to match your paint scheme or leave them be as the "L" brackets aren't very noticeable compared to store bought home theater "swivel" type speaker mounts. Now find the correct size bolts that will screw into the back of your home theater speakers and then mount each speaker on the corresponding bracket mount.
-
1
Tips & Warnings
If your speakers weigh more than a pound each, you will need to make sure your mounts are installed securely and properly to a wall stud or ceiling joist .
Check out the resources below for additional information!
Resources
- Photo Credit johnofalltrades.blogspot.com