How to Make a Homemade Ozone Generator

Save

Ozone is useful for eliminating certain types of bacteria and fungus and the associated odors. Many people set up an ozone generator in their basements after a water leak to prevent the buildup of mold, mildew and fungus. The transformer needed to make your ozone generator can be obtained at a reasonable price from a neon sign maker or you can purchase an inexpensive neon sign and cannibalize the transformer.

Things You'll Need

  • Quart glass jar
  • Pint glass jar that fits inside the quart glass jar
  • Aluminum foil
  • Transformer (minimum 3000v / maximum 15,000v)
  • Wires
  • Alligator clips
  • 2 foot x 2 foot wooden board
  • Electrical tape
  • Fold a sheet of aluminum foil several times until the foil can be placed into the bottom of the 1-pint glass jar. The foil should cover the bottom (inside) of the jar and should come at least 2 inches up the side.

  • Fold a sheet of aluminum foil and cover the bottom (inside) of the 1-quart jar with the foil coming up at least 2 inches inside jar, the same as in the smaller jar. Place the smaller jar inside of the larger jar. The aluminum foil in each jar will be separated by the glass of the smaller jar.

  • Set the two nested jars on your 2 foot by 2 foot board. Remove your transformer from the neon sign and place the transformer close to the jars. Make sure one of the wires from the transformer is long enough to reach the bottom of the larger jar and that the other wire is long enough to reach the bottom of the smaller jar. If the existing wires are not long enough, splice on additional wire to extend them. Wrap splices with electrical tape.

  • Attach alligator clips to the ends of the wires. Attach one alligator clip to the aluminum foil inside the larger jar and attach the other clip to the foil inside the smaller jar. Make certain the wires do not touch. If the two bares wires (that is, without the plastic insulation) should touch there will be an electrical spark and the possibility of a fire.

  • Plug in the transformer and turn it on. There should be a crackling noise from the ozone generator and if the generator is placed in the dark a bluish glow should come from it. Your generator can be run full time and should work fine for at least three to four months. As long as the transformer lasts, replace the aluminum foil every three to four months and your generator should last for years.

Tips & Warnings

  • Do not operate your ozone generator in a bedroom while you sleep--breathing too much ozone can damage your lungs.
  • Keep the two wires from your transformer separated as much as possible to avoid the possibility of an electrical short.
  • The aluminum foil from one jar should not touch the foil in the other jar.

References

Promoted By Zergnet

Comments

You May Also Like

  • Ozone Machine Dangers

    Consumers who have experienced a fire or recently restored a house may want to get rid of the odor left over by...

  • Ozone Generator for Water Treatment

    Ozone generators treat water by removing odor and a variety of contaminates. They are often utilized in the commercial and industrial sects;...

  • How to Make Ozonated Water

    Ozone is a compound made up of three oxygen atoms as opposed to the two atoms in atmospheric oxygen. It is an...

  • How to Make Ozone Test Strips

    Ozone in air can be detected with strips of a specially prepared paper, "Schoenbein" paper, that is coated with potassium iodide (KI)...

  • How to Build an Ozone Water Injector

    Building a home ozone water injector is a simple process. Industrial processes that require large amounts of highly purified water often use...

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!